Call 720-427-8844 Today!

Homeowners who love to feature marble and other types of natural stone in their homes inevitably end up having questions about maintaining their stone surfaces. One topic that comes up time and again as a major source of curiosity is marble polishing. Denver marble experts are providing answers on everything from how the process itself benefits the stone to exactly how important it is to maintaining the life of your marble.

If you are thinking that this topic sounds more complicated than you realized, it might be! But, the good news is that you have access to local professionals with a lot of knowledge on the best ways to take care of your natural stone.

Avoid Ruining Your Marble with This Information

The one thing everyone wants to avoid is harming, or even ruining, their marble surfaces as a result of marble polishing. Denver marble pros offer some insight and tips to avoid doing just that with answers to the following questions.

I’ve polished my marble before, and everything turned out fine. Why do I seem to be causing damage now?

According to Colorado polishing experts, this scenario is incredibly common – not just for unsuspecting homeowners but also for inexperienced professionals. It is possible to get by using the wrong materials or process to polish your marble and finish the job thinking your stone turned out beautifully.

However, you may encounter problems down the road when your marble surfaces suddenly seem to be suffering after being polished in the same way. This is a classic mistake of homeowners or amateur stone polishers who, simply put, do not have the skills or tools necessary to properly identify the best way to polish their stone.

When it comes to mistakes made in marble polishing, Denver experts are often contacted by homeowners after the wrong technique has gradually softened or eroded the surface of their stone over time, leaving it in poor condition at best or in a state of disrepair at worst.

Can’t I just use the same technique and products as my neighbor? His marble looks fantastic.

There is no doubt your neighbor may have marble that is beautifully cared for. However, here again, you can risk doing damage to your stone that isn’t completely obvious right away by using the improper process. Further, there is much more to this process than happening upon a singular, right way to go about marble polishing.

Denver marble professionals stress that the “right” technique can be very different from one stone surface to the next. Despite the fact that all marble is a soft stone created from the same basic, natural processes, there is a surprising amount of variation that exists in different types of the same material.

Ultimately, even slight differences in the minerals that make up your marble can change the entire polishing process. Someone who is truly knowledgeable and capable of identifying the precise minerals that make up your stone is the most qualified to advise you on caring for your natural stone surfaces, especially when it comes to marble polishing.

Denver Residents Get a Lesson on How Sealants Change the Polishing Process


It isn’t quite enough to understand the materials that make up your particular marble; they way your stone has been sealed is important to polishing and coming up with the best maintenance plan for your marble overall. The following questions are common among those who want to understand their stone and the ways that sealants can make a difference.

How is my stone’s sealant linked to the natural variations in my marble?

You can think of different types of marble like you might think about several versions of a cookie recipe that use different amounts of the same, or similar, ingredients. Slight changes in the way one recipe combines those ingredients can change more than the way your cookies taste, such as the way they look and their texture.

In the same way, marble that forms differently, or with different combinations of the same natural ingredients, will ultimately have a different appearance along with differences in the consistency of the stone. Experts refer to this difference in consistency as the marble’s porosity, and it applies to the existence of pores within the stone, the dimensions of these pores, and their arrangement.

As a result, the sealant used on your stone should be tailored to the consistency of the marble itself and will ultimately be taken into account during the process of marble polishing. Denver professionals can assess the sealant used in your case and determine how to proceed with the right maintenance plan.

Do sealants impact the cleaning products I should use?

The most common questions are not limited to the process of marble polishing. Denver home and business owners are often curious about using the cleaning products available to them on the market as well.

Both the consistency of your marble and the sealant used on your stone surfaces can influence your entire maintenance routine, including any cleaning products you use. To be safe, most professionals will recommend avoiding chemical cleaners that can damage your stone in exchange for a basic process using a soft cloth and plain water.

More to Know about Marble Polishing

Denver home and business owners commonly seek the advice of a professional to answer our next question:

How can I properly take care of my marble, in addition to having it polished by a professional?

There are a lot of things that may impact the maintenance plan that is right for your marble. For example, a marble expert may determine that you need more regular polishing appointments because you have marble floors in extremely high traffic areas.

Regardless of the schedule you decide on for having your marble polished, having a professional walk you through the best maintenance plan for your natural stone and following through with that plan is the best way to keep it looking great and in excellent condition.

If you haven’t consulted with anyone on cleaning your stone or the process of marble polishing, Denver – 9 marble experts can advise you on everything, from the makeup of your marble and the sealant used to the best way to clean, polish and maintain all your stone surfaces.

 

In Colorado and many other parts of the country, contractors are seeing a huge need for services related to concrete polishing. Denver concrete professionals have especially noticed the wide variety of ways that polished concrete is now being used in homes and businesses.

And, although concrete can be used for many purposes, it seems that stained concrete flooring is the main way that homeowners and commercial builders are choosing to implement the technique in their designs.

You may already know people who have decided to use concrete finishing in their homes, and you may have also noticed many more businesses in the area choosing to use concrete in their retail establishments.

When it comes to concrete polishing, Denver experts have a lot to say about the benefits of using polished concrete as well as the cost that local customers can expect if they decide to go for the look.

The Surprising Benefits of Concrete Polishing

Denver home and business owners, as well as other types of medical, educational, and commercial properties, are increasingly choosing a concrete finish for their floors because concrete provides several key benefits.

When compared with other flooring options, finishing concrete floors can deliver many advantages over other types of surfaces when it comes to factors like maintenance and durability, appearance, versatility and overall value.

How Concrete Can Help You Avoid Unnecessary Costs

Actually, the value of using concrete can be seen both in the up-front expense of concrete over other materials and the reduced long-term costs associated with concrete, due to its durability and low maintenance requirements.

For homeowners, using polished and stained concrete for interior floors means that the concrete slab that is already a part of their foundation can provide the surface for their floors. This provides a cost savings as the concrete takes the place of other types of flooring materials that would ultimately be placed on top of the existing cement.

The same is true for commercial facilities, and larger scale projects benefit even more from using the concrete that is already there instead of purchasing additional flooring material.

When it comes to the durability of concrete polishing, Denver professionals see a clear advantage in concrete over other materials, and most believe that the lower maintenance requirements and longer life of concrete floors provide even more in cost savings.

For both commercial and residential consumers, finished concrete floors are less susceptible to damage than other types of flooring surfaces, don’t require expensive repairs or restoration, and will never need to be replaced over the course of a lifetime.

For businesses concerned about maintenance and wear over time as a result of heavy foot traffic, the durability of concrete floors can provide significant long-term savings.

Finally, polished concrete is extremely low maintenance, meaning it saves home and business owners the time and money that is normally invested in maintaining other types of flooring materials. This is another major reason professionals have seen growing interest in concrete polishing.

Denver experts generally recommend simply cleaning concrete floors with a damp mop as part of a regular cleaning routine. More involved cleaning and maintenance is rarely required for polished concrete surfaces, and these is also no need for adding additional wax or polish.

Achieve a Unique Look with Concrete Polishing

Denver home and business owners have also taken advantage of the versatility of polished concrete surfaces. The colors and design of concrete surfaces can be created to achieve a wide variety of looks, and even the level of gloss desired can be modified to suit each customer.

Faux finishes are popular for those who want a truly unique look, and lovers of super-glossy, natural stone floors can even use stained concrete flooring to achieve the look they want, for a fraction of the cost. The possibilities are almost endless when it comes to interesting ways to transform a concrete surface.

This flexible nature of polished concrete floors has added to the number of ways it can be used as well as the many places it can be found. To see great examples of concrete polishing, Denver residents have to look no further than local stores, offices, hotels, showrooms, and even residential homes.

The Environmental Impact of Concrete

For many people, the environmental impact of any method of building or design is a factor in their decision to use it, and the same can be said for concrete polishing. Denver is known across the country as being an eco-friendly city, and this may in some way be connected with the growing popularity of concrete.

Those concerned about green construction and design will be happy to know that using concrete is considered a sustainable option, and concrete polishing can be an eco-friendly choice.

What You Can Expect To Pay for Polished Concrete

There are several factors that might impact the cost you can expect from hiring a contractor or professional to put a polished concrete finish in your home or place of business.

Generally, the first basic cost of something like concrete floor polishing would depend on the amount of work required to grind the surface into the smooth, polished look you desire. A smoother, higher gloss requires a higher level of grinding and will increase your expense.

In addition to the cost of polishing itself, you should also consider that using concrete stain or patterns to create a unique surface would add additional expense to your project. Also, it tends to be easier to work with a concrete floor grinder in more spacious areas, so those looking to use polished concrete on a larger scale might notice a slight cost benefit versus a homeowner who wants a concrete surface in an area that is more confined.

Overall, the price you will pay for polished, stained concrete floors will depend on all of these things in addition to your location and the professional you hire to complete your concrete polishing. Denver residents could pay anywhere from $4 to $12 per square feet of concrete, depending on the scale of their project and design requirements.

 

What you don’t know about concrete polishing may surprise you, and you may be much more inclined to opt for concrete in your own home or business after learning more about the process and its advantages.

It turns out that creating polished and stained concrete surfaces is a technique gaining popularity in homes and retail establishments everywhere for a variety of reasons. In terms of visual appeal, polishing concrete can provide a unique look to just about any space, and the shiny, almost reflective surface is a nice alternative to other types of materials.

In addition to being a nice alternative to other design choices, concrete polishing allows much more creativity when it comes to design than many people know. There are actually a wide variety of ways to make polished concrete even more interesting by using concrete stain to achieve different colors, creating unique patterns with saw cuts, and even adding other elements to the concrete to create a one-of-a-kind look.

There are almost endless ways to customize your look with concrete, and even those who wish to tone down the glossiness of their polished concrete surfaces can do so by simply choosing the level of polish they prefer.

Although concrete polishing has many design benefits, many professionals in the Denver, Colorado area are also endorsing the technique to their residential and commercial clients because it is generally accepted as being easier to keep up than many other choices. In fact, most of the time simply using a dust mop or cloth on your polished concrete as part of your regular cleaning routine is enough to maintain the surface and keep it looking great.

A Behind The Scenes Look at The Process of Polishing Concrete

The process of concrete polishing can be compared with techniques used to polish other material surfaces, such as natural stone. Essentially, the job generally requires a professional-duty machine, called a concrete floor grinder, that uses a range of sandpaper-like discs to smooth the concrete surface to the level of polish desired.

During the initial stages of concrete polishing, the concrete is polished using coarse grinding discs that are capable of removing many of the surface imperfections found in the concrete, such as shallow pits and stains. The level of work required for this step depends on the overall condition of the concrete itself.

After the concrete has been prepared through the rough grinding process, the next step in cement polishing requires a technique known as “lapping.” This technique involves using finer and finer polishing discs to increase the luster of the concrete, similar to the way one would use different grits of sandpaper when sanding a piece of wood to gain different levels of smoothness.

To ensure you end up with the results you want from concrete polishing, Denver polishing experts will be able to closely monitor your concrete throughout the lapping process and verify you will be getting the look you expected.

A sealer is also used throughout the process to create a nice concrete finish. Although the sealer used cannot be seen, it is important because it will penetrate the concrete and ultimately provide protection for the concrete surface.

Depending on the situation, the sealant used may remove the need for a finishing polish on the concrete, although some professionals use topical polishing agents to reach a higher level of shine and further protect the surface from dirt.

Two Polishing Methods: Wet Vs. Dry

There are actually two different methods that can be used during concrete floor polishing: wet and dry. Each one can offer its own unique benefits, but you will probably find that most professionals today are using a dry technique for concrete polishing. Colorado professionals would likely tell you that this method is generally more timely and convenient for those involved.

When a wet polishing method is used, water acts as a coolant for the grinding discs during use and provides a way to reduce the amount of dust usually created from the grinding machine. This lubricating effect may also lengthen the life of the abrasive discs used during polishing.

In terms of any disadvantages, the wet method can become difficult to clean up due to the amount of waste that is created from the mix of water and dust, which also has to be collected and then disposed of properly. This is one of the main reasons wet polishing tends to be much more time consuming and less convenient.

In contrast, dry polishing does not require the use of water, and a vacuum system is used to eliminate the dust created from polishing.

If you are looking for a professional to do your concrete polishing in Denver, you may also find there are many that like to use both polishing methods. For instance, some professionals use the dry polishing method during the initial stages of polishing, when there is more dust being produced, and then switch to wet polishing once they are using finer abrasives on the concrete.

Consider These Factors before You Decide on Concrete

Concrete polishing is a popular option among homeowners and commercial builders for many reasons, including the appeal of a polished concrete finish, the ease of maintaining concrete surfaces, and the strength and durability of the material. In fact, many people are now choosing polished concrete surfaces over natural stone and opting to stain their concrete to achieve the stone look they want for much less money.

If you are interested in using polished concrete in your home or business, it is a good idea to make sure you understand the process and the options available to you. Some additional factors that may interest you include:

  • The difference between polished concrete and other types of natural and synthetic surfaces and the advantages it can offer you
  • The cost of installing stained concrete floors or other concrete features in comparison with other options as well as factors that influence cost
  • Factors that may make some types of concrete easier to polish than others
  • Your options in terms of the level of shine of your concrete and designs that can be achieved using things like concrete stain, engraving and other techniques that create patterns and faux finishes
  • Additional factors that make concrete beneficial, including its maintenance and the ease of cleaning concrete floors

The versatility of concrete, along with the emergence of new technology that is making the process of polishing concrete easier and less expensive, makes it a great option for dozens of unique applications in homes and businesses, including both indoor and outdoor surfaces.

Understanding the process and achieving the look you want from concrete polishing is much easier with the help of a qualified expert, who is experienced using polishing equipment and can bring your design ideas to life.

Surfaces that look dirty can seriously detract from the beauty of tile, whether the surfaces are in your kitchen backsplash, floors or bathroom.  When tile and grout cleaning is necessary, the offender causing most of the trouble is generally the grout between your tiles.  However, with a little effort and the appropriate cleaning method, it is possible to get both your tile and grout looking like new again.

There are lots of ways that tile and grout can become dirty.  When it is located in your bathroom, the problem is usually stained grout caused by mildew or mold.  For kitchen tile and grout, cleaning may be necessary as a result of stains from food, general traffic, mildew and grease.

Surprising Ways to Control Mold and Mildew

Tile and grout cleaning can be the most difficult when mildew or mold is present because of the environment that usually supports them.  Mildews and molds need a source of moisture, a warm environment and a source of food to grow.

If the problem is in your bathroom, you can see why mold and mildew may be difficult to combat.  It’s not practical to eliminate warmth by taking cold showers for the rest of your life.  In reality, your best bet for dealing with the problem is doing your best to control the food sources of the mold and mildew as well as the moisture that encourages it.

Surprisingly, the source of food for the mold and mildew growing in and around your tile and grout usually comes from the soap you use and your skin cells.  A lot of soap contains phosphates, which can act as a fertilizer for mold or mildew.  If you can keep soapy residue from accumulating in any area, you can effectively control the growth of mold and make your tile and grout cleaning much easier.

It’s not quite as easy to keep moisture at bay, especially in the bathroom.  Here again, towel drying your floor or wiping down your bathroom walls with a squeegee every time you shower may be a little overzealous.

If that level of effort is not really practical for you, you can try leaving the bathroom door open after shower use.  This allows some of the humid air to escape, rather than building up and creating the perfect environment for mold. You may also find that a bath fan can keep the humidity from getting too high.

Stay Clean and Green: Cleaning Non-Stone Surfaces

Regardless of the location and cause of your staining, your tile and grout cleaning methods will be different depending on the material that makes up your tile.  However, it is always best to go with the least acidic solution that is effective, no matter what type of surface you are cleaning.

For non-stone tile and grout cleaning, something as simple as baking soda can work effectively as a cleaning agent.  You can combine it with a small amount of water to produce a paste that will clean both your tile and grout surfaces very well.

Simply pat a bit of the cleaning paste onto your tile and grout and scrub the paste in a circular motion.  This will clean your grout more effectively than scrubbing in an up and down fashion.  Once you are done cleaning, rinse the area with pure water and remove any moisture that remains on the surface with either a sponge or towel.

Avoid Ruining your Stone Tile with a Common Cleaning Agent

While vinegar is often recommended as the best tile and grout cleaning solution, keep in mind that this “weak” acid is actually quite corrosive.  When used on unsealed or natural stone areas, it has the potential to etch the surface of your tile, and it is also capable of gradually fading the grout over time.

Remember that acid works by dissolving dirt, and acidic cleaners don’t distinguish between dirty surfaces and stone.  Other than pure water, anything you intend to use for tile and grout cleaning on stone surfaces should be specifically noted as safe for stone.  Any manufactured cleaning agents that are not acidic generally make it known on their label.

It is important to be cautious even with tile materials that are not generally bothered by acidic agents, such as ceramic and porcelain.  While they don’t tend to be naturally susceptible to acid damage, grout almost always is, especially if it hasn’t been sealed properly.  Acidic agents can dissolve and fade out grout dyes, deteriorating the color and texture over time.

In general, follow these steps for tile and grout cleaning that involves natural stone of any kind:

  • Use a neutral cleaning agent that is designated as non-acidic and safe for use on your natural stone surfaces, regardless of their location.
  • Always use a clean towel or mop, and never use rough or grating materials that may scratch your stone or erode your grout.
  • Avoid using more cleaning product than is recommended by its manufacturer to prevent a build-up or streaky film on your tile surfaces.
  • Don’t use water that has become dirty for tile and grout cleaning.  If the water you are using is not clear enough to see through, it is too dirty to be cleaning with.  Using dirty water can result in a gradual build up of dirt on your tile surfaces and a progressive staining of your grout.
  • Avoid acidic cleaners like vinegar on natural stone as well as cleaning agents that contain lemon or other acidic fruit extracts in their ingredients.  These can degrade the surface of your stone.
  • Avoid using scouring cleansing creams or powders because they generally contain abrasive materials that can also damage the surface of your stone.

Overall, the most effective way to keep your tile and grout cleaning from becoming a constant chore is to ensure all your tile and grout surfaces are sealed properly.  In general, this is the best way to keep any surface from absorbing excess moisture or becoming stained by spills or dirt.

The Marble Polishing Experts, a local business in Denver, Colorado, can advise you on the proper tile and grout cleaning methods that will not damage your natural stone surfaces.

What is Marble Restoration?

When it comes to marble restoration, the first thing you might think of is an artisan skillfully restoring famous statues and works of marble art that have been around for generations.  However, there is another side to marble restoration that often involves just as much skill and attention to detail.  Anyone who has seen what the work of an expert in restoring marble can do for the natural stone is usually amazed by the difference it can make in its appearance.

Is restoring marble a DIY job?

If you aren’t clear on marble restoration and how it may differ from skills like marble polishing, it may help to know that restoring marble is sometimes viewed as work that requires a high level of skill as well as some natural talent for the task at hand.  Some claim that those skilled in restoring marble can handle polishing the natural stone with ease, but that simply knowing how to polish marble will not make you an expert in marble restoration.

People who consider themselves an expert in restoring marble generally have more experience with the stone, a history of solid training, a natural affinity for marble, and an understanding of the stone’s luxurious and sometimes sensitive nature.  Generally, someone with these qualities is capable of restoring marble of any kind, including marble found in flooring, counters, wall cladding, fireplaces, etc…

Typically, a marble restoration job will include tasks like cleaning and polishing your marble, but it will also generally require some level of marble repair.  This is often a complicated aspect of the job, and it may be the most risky as well.  Without expert help to do a marble repair, those with less experience working with the stone may damage the marble they are working on and cause more harm than good.  When the work involves a prized possession or priceless area of the home, mistakes in marble repair may cost even more than time and money.

Hiring an expert to complete your marble restoration project ensures you will be thrilled with the look of your marble and will probably avoid costly errors.

DIY expertise is far beyond what it ever has been in the past, and homeowners are taking a lot more responsibility for changes, upgrades and repairs around their home.  Further, the knowledge available on the internet and through other sources has made it extremely easy to access tutorials and instructions for almost any job.  However, something like marble restoration is probably not the best task for an inexperienced homeowner to tackle.

Unfortunately, many who attempt this type of job themselves end up damaging or completely ruining their marble.  By using the wrong chemicals or following inaccurate instructions, they end up with discolored and stained stone, scratches that dull the marble and make it less attractive and even holes or cracks that can seriously weaken the stone.

Much of the time, these results will require the help of a marble restoration expert to fix, and the homeowner is ultimately forced to hire someone to correct their mistakes and complete the marble restoration as well.  Many of these cases will require additional time and resources, costing the homeowner more in the long run than they would have paid with expert help from the beginning.

What is Required and What to Expect from Marble Restoration

Marble is a stone that does require maintenance to keep it looking spectacular after years of use, and marble restoration may ultimately be necessary for some people.  If you are searching for someone to restore your stone or even help you determine the best way to keep it looking nice, you will probably want to find someone with knowledge in all aspects of marble care.  Without someone who has a full understanding of cleaning, polishing, repair, and restoration, you may not receive the proper care for your marble, and you may end up paying much more than you should.

For example, sometimes minor stains or scratches in the surface of your marble can be corrected relatively easily with the right tools and polishing technique.  An expert can properly determine the level of marble restoration needed and the type of work required to fix these types of problems.

In contrast, because marble is so porous, it is possible for serious damage to occur and show up in the form of chips, cracks, and even serious breaks in the stone.  This type of repair requires an entirely different level of skill and difficulty, especially when portions of the marble stone have been broken apart from the original slab.  In these cases, the displaced pieces of marble will have to be fixed back to its former position without damaging the surrounding stone or creating an uneven surface.

Even more complex levels of marble restoration and repair are necessary when pieces of marble have broken off the original marble stone and cannot be found.  For this type of damage, another material or piece of marble that strongly resembles the initial stone must be fashioned to fit where the broken sections came from.  This can involve   complex tasks like creating molds to reflect the broken marble pieces and creating a filler of marble dust and cement to replicate material that is missing.  Once the missing pieces of broken marble have been replicated, they can then be affixed to the original stone, without being distinguishable from the surrounding area.

Regardless of the level of difficulty required for your marble restoration, you can expect the work of a professional to return your marble to its original state of beauty.  In addition to making it look like new, you should also be given the instructions you need to maintain the look and health of your marble for as long as you have it.  Often, your instructions will also help you combat the type of damage that caused you to need repair in the first place.

Overall, marble restoration is a great way to bring your natural stone surfaces back to life, but it is usually best reserved for an expert.  Whether your job requires a simple repair or full-scale restoration, the right experts can make sure the job is done in the best way possible.

If you live in Denver or within the surrounding areas of Colorado, you can use a consultation with the Marble Polishing Experts to discuss the current state of your stone and your potential need for marble restoration.

Google+